The R25-10T4-FSID precision ballnut
is to be used with our Gten range of ballscrews of JIC C5 and C7
lead accuracy grades. Flange style with internal ball return and
diameters from 16mm to 80mm with leads of 5mm to 10mm.
Critical speed is the first resonant frequency (speed) of the rotating shaft. Resonance in a rotating shaft can be catastrophic and even break the shaft. However, not all ball screws will necessarily exhibit such behavior since the nut represents another support of the shaft, permanently changing the unsupported length of the shaft and its resonant frequency.
It is necessary to confirm if the ballscrew rotational speed is within 80% of the critical speed of the ballscrew.
Figure 3.17 shows a diagram which summarizes the allowable rotational speed of the ballscrew shaft.
The allowable rotational speed is regulated also by dm - n value (dm: Diameter of central circlof steelball, n: Revolution speed-RPM) Which expressesthe peripheral speed.
For precision (Accuracy grade C7-C0) dm - n is lower that and equal to 70,000.
To make this calculation we have provided a handy calculators to measure the critical speed of a ballscrew.
The output form this calculator will show the approximate point at which the ballscrew will start to resonate (Whip) and you should consider to set the maximum RPM to 80% of this speed.